TOC | | | | |
mergedb.inp - input/control file for mergedb
Sample file
a360
1996 12 25 0 0 0 1996 12 25 23 59 30
30 15 3 1 0 0 0
chl13600.96o
gode3600.96o
sol13600.96o
brdc3600.96n
igs08853.sp3
1 0 0 0 0 0 0
Description of each line in this file.
-
a360
- Database four or six character ID
-
1996 12 25 0 0 0 1996 12 25 23 59 30
- Start and stop times
-
30 15 3 1 0 0 0
- Data control flags:
- Data interval [seconds]
- Elevation cutoff [degrees]
- Number of
RINEX
data files
NOTE: this should equal the number of stations.
- Use a precise ephemeris (0 = NO; 1 = YES)
- Create database data file (0 = NO; 1 = YES)
- Create database orbit file (0 = NO; 1 = YES)
- Number of satellites to omit (0 = NO; 1 = YES)
NOTE: if non-zero, the PRN numbers of the satellites
to be omitted would follow.
-
chl13600.96o
-
-
gode3600.96o
-
-
sol13600.96o
- The
RINEX
data files
NOTE: the number of files must match the number
of stations
-
brdc3600.96n
- The broadcast message file
-
igs08853.sp3
- The precise ephemeris file
NOTE: this line will be omitted if no precise
ephemeris is to be used.
-
1 0 0 0 0 0 0
- Generate specified plot (0 = NO; 1 = YES)
- Elevation
- Coverage
- Phase residuals
- Clock
- Phase - pseudorange
- Ionosphere residuals
- Wide-lane residuals
TOC | | | | |
inp.html
March 4, 1999
Steve Hilla