Operating Javad and Septentrio receivers in parallel via splitters
	Javad ref rx - external freq, default tracking loop settings
	Javad PTU rx - external freq, default tracking loop settings
		(not using Geo++ settings quite yet)
	Septentrio rx - no exteral freq, default tracking loop settings
	  (BASE TESTING TO COMPARE JAVAD AGAINST HOW i'VE BEEN COLLECTING
	   DATA UP UNTIL THIS POINT ON SEPTENTRIO RX)

12nov13

  files
	schedule PTU_Schedule_pan30sec_1600.txt
	output position Position_pan30sec_1600
      septentrio file: SEPT38Q.12_
      javad files: PTU 689_1113q.jps
			 ref 699_1113q.jps

*** did not execute NISTTime to sync clock, attempted to sync
	but servers were timing out

  PTU parameters (BASE SETTINGS)
	delta speed pd/td	0
	base speed pb/tb	57
	speed bounds
		upper pu/tu	1985
		lower pl/tl	0

1620-1635	SPEED TEST
ran delta-pan motions with different speeds
pa2000 (pan acceleration I was using in all previous calibrations,
	I believe)
scenarios
	1620-1625	ps1000
	1625-1630	ps600
	1630-1635	ps200

2315 UTC  ACCELERATION TEST
ran delta-pan motions with different accleration
ps1000 (pan speed which is 200 pos/sec greater than ps800 value
	used in all previous calibrations)
scenarios
	1635-1640	pa2000
	1640-1645	pa1000
	1645-1650	pa500






