1 = Free Format (For Geoid) Type 1 :
ALL THE SAMPLES BELOW ARE VALID FORMAT 130 59.987654321 077 59.987654321
BM1027 50 75
XX8063 45.3 078
AIRPORT SC1 47 18.55 107 46
30 17 089 01
CORNER MARKER 48 14 17 120 07 41.247
DATA PT #4077 42 42 42.4242 104 04 04.44445
this one should be out of bounds -89 359
Bangor ME 44 47 59.0 68 49 11
Miami FL 25 49 11 80 16 47.0
San Diego CA 32 43 47 117 10 11
Seattle WA 47.45 122.30
Anchorage AK 61.17 150.02
Honolulu HI 21 21 0 157 55 47
Guam 13.5000 215.2
Northern Mariana Island 17.1234 214.056
BAKER ISLAND 0 12 15 176 28 06.34534
HOWLAND ISLAND 0 48 176 38
JARVIS ISLAND -0 02 160 02
LIHUE KAUAI ISLAND 21 59 159 23
PALMYRA ISLAND 5 52 162 05
American Samoa -14 20 170 00
San Juan PR 18 28 066 07
St. John USVI 18.3333 64.7333
SE Hawaii NAD83 (PA11) W0 from USGG2012 18.1 154.1
NW Hawaii NAD83 (PA11) W0 from USGG2012 23.9 160.9
SE Guam&Mariana NAD83(MA11)GUVD04&NMVD0311.1 214.1
NW Guam&Mariana NAD83(MA11)GUVD04&NMVD0317.9 216.9
SE American Samoa NAD83 (PA11) ASVD02 -16.9 168.1
NW American Samoa NAD83 (PA11) ASVD02 -11.1 173.9
SE P.Rico/USVI NAD83(2011) PRVD02&VIVD0915.1 064.1
NW P.Rico/USVI NAD83(2011) PRVD02&VIVD0920.9 68.9
SE Conterminous US NAD83 (2011) NAVD88 24.1 060.1
NW Conterminous US NAD83 (2011) NAVD88 57.9 129.9
SE Alaska NAD83 (2011) NAVD88 49.1 126.1
NW Alaska NAD83 (2011) NAVD88 71.9 187.9
<----- Columns 01-40 for mark ID ------>
<------ Columns 41-80 for lat lon ----->
1 2 3 4 5 6 7 8
12345678901234567890123456789012345678901234567890123456789012345678901234567890
RULES FOR GEOID FREE FORMAT TYPE 1 :
This is an ASCII format, where the first 40 characters
of each record may contain the station name or be blank.
The rest of the record (characters 41-80) must contain
the latitude and longitude in one of three formats:
(a) (two numbers) decimal/integer degrees
(b) (four numbers) integer degrees, decimal/integer minutes
(c) (six numbers) integer degrees, integer minutes, decimal/integer seconds
The latitude must be positive North.
The longitude can be positive east or west;
the user selects which was used when running the program.