Shared Solution

PID: HT3505
Designation: 941 5020 Q TIDAL
Stamping: 5020 Q 1985
Stability: Monument will probably hold position well
Setting: Stainless steel rod without sleeve (10FT+ or 3.048M+)
Mark Condition: G
Description: The bench mark is a disk set on a rod located 58.22 m (191.0 ft) north of bench mark 941 5020 M TIDAL, 4.57 m (15.0 ft) north of the centerline of the road leading to Point St. Joseph Fish Company Pier, and 2.44 m (8.0 ft) west of an orange NOS fiberglass witness post. The bench mark is set 15 cm (0.5 ft) below the ground, crimped to the top of a stainless steel rod driven 2.41 m (7.9 ft) to absolute refusal, covered by an aluminum access cover, and protected by a concrete sleeve.
Observed: 2006-09-07T17:10:00Z more obs 1998-04-21 more obs Original
Source: OPUS - page5 1209.04
Close-up View
REF_FRAME:   NAD_83(2011) EPOCH:   2010.0000 SOURCE:   NAVD88 (Computed using GEOID18) UNITS:  m  SET PROFILE   DETAILS
LAT: 37° 59' 46.56670" ±  0.004   m
LON: -122° 58' 44.57614" ±   0.003   m
ELL HT: -13.285 ±   0.003   m
X: -2739447.055 ±   0.004  m
Y: -4221757.427 ±   0.001  m
Z: 3905109.403 ±   0.005  m
ORTHO HT: 19.806 ±  0.047   m
UTM  10 SPC  403(CA 3)
NORTHING: 4205401.213m 668942.365m
EASTING: 501839.541m 1782286.897m
CONVERGENCE: 0.01289769° -1.51775318°
POINT SCALE: 0.99960004 0.99993831
COMBINED FACTOR: 0.99960212 0.99994039
CONTRIBUTED BY
rhalfhill
Evans-Hamilton Inc.
Horizon View
The numerical values for this position solution have satisfied the quality control criteria of the National Geodetic Survey. The contributor has verified that the information submitted is accurate and complete.