Shared Solution

PID:	EA3077
Designation:	865 8120 C TIDAL
Stamping:	8120 C 1976
Stability:	Monument will probably hold position well
Setting:	Copper-clad steel rod without sleeve (10FT+ or 3.048M+)
Mark Condition:	G
Description:	The bench mark is a disk located at the U.S. Corps of Engineers (COE) Eagle Island Maintenance Yard, on the SW side of the COE property line, 23.47 m (77.0 ft) SE of the SE corner of the shop and office building, 8.35 m (27.4 ft) SW of the SW corner of the building, and 0.70 m (2.3 ft) NE of the SW fence line and behind the electrical shop. The bench mark is crimped to the top of a copper-clad steel rod driven to an unspecified depth, encased in a 5-inch PVC pipe and concrete kickblock.
Observed:	2014-03-31T22:05:00Z	more obs 2001-06-27
Source:	OPUS - page5 1209.04

Close-up View

REF_FRAME: NAD_83(2011)

EPOCH: 2010.0000

SOURCE: NAVD88 (Computed using GEOID18)

UNITS: m

SET PROFILE

DETAILS

LAT:	34� 13' 38.16909"	� 0.002 m
LON:	-77� 57' 15.83799"	� 0.005 m
ELL HT:	-35.616	� 0.027 m
X:	1101693.968	� 0.010 m
Y:	-5162854.412	� 0.022 m
Z:	3567298.312	� 0.013 m
ORTHO HT:	1.122	� 0.053 m

	UTM 17	SPC 3200(NC )
NORTHING:	3791552.063m	53453.265m
EASTING:	780552.266m	705941.999m
CONVERGENCE:	1.71419906�	0.60348954�
POINT SCALE:	1.00057035	1.00003106
COMBINED FACTOR:	1.00057594	1.00003665

	CONTRIBUTED BY
	minilek.hailegeberel
	Center for Operational Oceanographic Products and Services

Horizon View

The numerical values for this position solution have satisfied the quality control criteria of the National Geodetic Survey. The contributor has verified that the information submitted is accurate and complete.