Shared Solution

PID:	DP0738
Designation:	877 9748 SPICGS 003
Stamping:	SPICGS 003
Stability:	Monument will probably hold position well
Setting:	Stainless steel rod without sleeve (10FT+ or 3.048M+)
Mark Condition:	G
Description:	The mark is brass survey disk on stainless steel rod driven 49.9 ft, encased in 4-inch PVC pipe and concrete kickbcock, 84.9 ft ENE of a wooden power pole, 70.8 ft NW of the gate post in the chain-link fence on the south side of the paved entrance road, 28.8 ft south of the NE corner of the chain-link fence, and 17.4 ft north of the NE corner of the concrete foundation slab for the electrical power box for the gate in the chain-link fence.
Observed:	2018-12-09T21:09:00Z	more obs 2018-12-10
Source:	OPUS - page5 1603.24

Close-up View

REF_FRAME: NAD_83(2011)

EPOCH: 2010.0000

SOURCE: NAVD88 (Computed using GEOID18)

UNITS: m

SET PROFILE

DETAILS

LAT:	26� 4' 26.05030"	� 0.015 m
LON:	-97� 9' 53.75045"	� 0.016 m
ELL HT:	-20.661	� 0.036 m
X:	-715017.766	� 0.017 m
Y:	-5687944.579	� 0.035 m
Z:	2786409.507	� 0.008 m
ORTHO HT:	0.755	� 0.070 m

	UTM 14	SPC 4205(TX S)
NORTHING:	2885160.415m	5045826.713m
EASTING:	683553.789m	433581.148m
CONVERGENCE:	0.80679444�	0.60613056�
POINT SCALE:	1.00001601	1.00002466
COMBINED FACTOR:	1.00001926	1.00002791

	CONTRIBUTED BY
	joshua.d.witmer
	National Oceanic and Atmospheric Administration

Horizon View

The numerical values for this position solution have satisfied the quality control criteria of the National Geodetic Survey. The contributor has verified that the information submitted is accurate and complete.