Shared Solution

PID:	DK6692
Designation:	872 1147 A
Stamping:	1147 A 1996
Stability:	Monument will probably hold position well
Setting:	Stainless steel rod without sleeve (10FT+ or 3.048M+)
Mark Condition:	G
Description:	The bench mark is a flange-encased rod located just east of the boat ramp, 69.49 m (228.0 ft) west of bench mark 1 1973, 63.40 m(208.0 ft) WNW of the tide gage, 4.02 m (13.2 ft) NE of the SW corner of the seawall,3.14 m (10.3 ft) north of the south edge of the seawall, and 2.99 m (9.8 ft) SW of the SW corner of the helicopter pad. The datum point is set 9 cm (0.3 ft) below the level of the NGS logo cap,and encased with a 5 inch NGS logo cap.
Observed:	2010-06-21T14:21:00Z	more obs 2006	more obs Original
Source:	OPUS - page5 1209.04

Close-up View

REF_FRAME: NAD_83(2011)

EPOCH: 2010.0000

SOURCE: NAVD88 (Computed using GEOID18)

UNITS: m

SET PROFILE

DETAILS

LAT:	29� 3' 48.53708"	� 0.015 m
LON:	-80� 54' 55.64581"	� 0.009 m
ELL HT:	-27.366	� 0.024 m
X:	880940.779	� 0.012 m
Y:	-5509414.128	� 0.015 m
Z:	3080039.986	� 0.020 m
ORTHO HT:	0.917	� 0.059 m

	UTM 17	SPC 901(FL E)
NORTHING:	3215021.918m	524068.747m
EASTING:	508229.431m	208232.240m
CONVERGENCE:	0.04106910�	0.04106910�
POINT SCALE:	0.99960084	0.99994201
COMBINED FACTOR:	0.99960514	0.99994631

	CONTRIBUTED BY
	damon.a.wolfe
	US Army Corps Of Engineers

Horizon View

The numerical values for this position solution have satisfied the quality control criteria of the National Geodetic Survey. The contributor has verified that the information submitted is accurate and complete.