Shared Solution

PID: DC1313
Designation: 941 0230 M TIDAL
Stamping: 0230 M 1977
Stability: Monument will probably hold position well
Setting: Copper-clad steel rod without sleeve (10FT+ or 3.048M+)
Mark Condition: G
Description: The bench mark is a disk located 37.80 m (124.0 ft) west of the NW corner of the Ritter Hall Building, 22.25 m (73.0 ft) NW of the NE corner of the Public Affairs Office, 1.16 m (3.8 ft) west of the west edge of the pathway, and 0.50 m (1.6 ft) north of an orange fiberglass witness post. The bench mark is set 6 cm (0.2 ft) below ground level, crimped to a copper-clad 5/8-inch steel rod driven to a depth of 12.80 m (42.0 ft), and encased in a 5 inch aluminum cover set in a concrete mass.
Observed: 2011-03-25T15:36:00Z more obs 2009-09-11 more obs Original
Source: OPUS - page5 1209.04
Close-up View
REF_FRAME:   NAD_83(2011) EPOCH:   2010.0000 SOURCE:   NAVD88 (Computed using GEOID18) UNITS:  m  SET PROFILE   DETAILS
LAT: 32° 51' 55.37530" ±  0.007   m
LON: -117° 15' 15.25177" ±   0.002   m
ELL HT: -25.730 ±   0.007   m
X: -2455733.286 ±   0.002  m
Y: -4767234.803 ±   0.002  m
Z: 3441414.145 ±   0.009  m
ORTHO HT: 9.281 ±  0.051   m
UTM  11 SPC  406(CA 6)
NORTHING: 3636391.981m 577942.043m
EASTING: 476214.243m 1906011.242m
CONVERGENCE: -0.13796648° -0.55184566°
POINT SCALE: 0.99960698 0.99998736
COMBINED FACTOR: 0.99961102 0.99999140
CONTRIBUTED BY
keith.brkich
National Oceanic and Atmospheric Administration
Horizon View
The numerical values for this position solution have satisfied the quality control criteria of the National Geodetic Survey. The contributor has verified that the information submitted is accurate and complete.