get_mark_list.prl - Takes parameters from your URL and retrieves a list of 'publishable' stations from the NGS database which fall within those parameters.
Click on the links below to get the URL for retrieving by one of the five methods RADIUS, MINMAX, NAME, PROJECT, PIDS (See URLs at the end of this page for a different format of output) RADIUS: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=RADIUS&2=N384417&3=W0982215&4=5.0&5=X-0-0 MINMAX: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=MINMAX&2=N413000&3=W0983000&4=N413730&5=W0983730&6=X-0-0 NAME: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=NAME&2=NE&3=PUMKIN&4=X-0-0 PROJECT: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=PROJECT&2=GPS1229/8&3=N&4=X-0-0 COUNTY: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=COUNTY&2=FL&3=125&4=X-0-0 PIDS: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=PIDS&2=MN0298+AC3260+JG0700&3=X-0-0 Here are the parameter definitions for each retrieval method: RADIUS 1 = Retrieval Method 2 = Latitude Deg-Min_Sec. 3 = Longitude Deg-Min-Sec 4 = Radius in Miles 5 = Control Type MINMAX 1 = Retrieval Method 2 = Min Latitude Deg-Min_Sec. 3 = Min Longitude Deg-Min-Sec 4 = Max Latitude Deg-Min_Sec. 5 = Max Longitude Deg-Min-Sec 6 = Control Type NAME 1 = Retrieval Method 2 = State Code 3 = First few letters of Station Name 4 = Control Type PROJECT 1 = Retrieval Method 2 = Project ID 3 = Determination Code Y = Retrieve only marks determined in the project N = Retrieve any mark observed in the project O = Retrieve only marks occupied as StandPoint in project 4 = Control Type COUNTY 1 = Retrieval Method 2 = State Code 3 = County Fips Code 4 = Control Type PIDS 1 = Retrieval Method 2 = A string of PIDs in the format PID1+PID2+PID3+...etc 3 = Control Type The 'Control Type' parameter has the following meaning: X-0-0 = Any Horz. and/or Vert. Control H-G=0 = GPS Sites Only H-0=0 = Any Horizontal Control H-A=0 = Horizontal Order-A H-B=0 = Horizontal Order-B or Better (HARN) H-1=0 = Horizontal Order-1 or Better H-2=0 = Horizontal Order-2 or Better V-0=0 = Any Vertical Control V-1=0 = Vertical Order-1 V-2=0 = Vertical Order-2 or Better TID=0 = Vertical Tidal Bench Mark F-C=0 = FBN and/or CBN P-S=0 = PAC and/or SAC COR=0 = CORS D-D-0 = Destroyed Marks Only (Normally not published) The last field above indicates the Monument Stability, Example: H-2-0 = Horizontal Second Order Any Stability H-2-B = Horizontal Second Order Stability B The Output Format is: Dist = Distance from Center (For Radius retrieval Only) PID = NGS Permanent Identifier H = Horizontal Order V = Vertical Order Vert_Source = Vertical Datum and How Determined Approx. = Approximate Latitude Approx. = Approximate Longitude Deignation = Station Name Use the URLs shown below with a 'F-' preceeding parameter 1 if your want your output to be contained in a scrolling list box on a Form. F-RADIUS: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-RADIUS&2=N384417&3=W0982215&4=5.0&5=X-0-0 F-MINMAX: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-MINMAX&2=N413000&3=W0982215&4=N413730&5=W0983730&6=X-0-0 F-NAME: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-NAME&2=NE&3=PUMKIN&4=X-0-0 F-PROJECT: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-PROJECT&2=GPS1229/8&3=N&4=X-0-0 F-COUNTY: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-COUNTY&2=FL&3=125&4=X-0-0 F-PIDS: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-PIDS&2=MN0298+AC3260+JG0700&3=X-0-0
Here are the parameter definitions for each retrieval method: RADIUS 1 = Retrieval Method 2 = Latitude Deg-Min_Sec. 3 = Longitude Deg-Min-Sec 4 = Radius in Miles 5 = Control Type MINMAX 1 = Retrieval Method 2 = Min Latitude Deg-Min_Sec. 3 = Min Longitude Deg-Min-Sec 4 = Max Latitude Deg-Min_Sec. 5 = Max Longitude Deg-Min-Sec 6 = Control Type NAME 1 = Retrieval Method 2 = State Code 3 = First few letters of Station Name 4 = Control Type PROJECT 1 = Retrieval Method 2 = Project ID 3 = Determination Code Y = Retrieve only marks determined in the project N = Retrieve any mark observed in the project O = Retrieve only marks occupied as StandPoint in project 4 = Control Type COUNTY 1 = Retrieval Method 2 = State Code 3 = County Fips Code 4 = Control Type PIDS 1 = Retrieval Method 2 = A string of PIDs in the format PID1+PID2+PID3+...etc 3 = Control Type The 'Control Type' parameter has the following meaning: X-0-0 = Any Horz. and/or Vert. Control H-G=0 = GPS Sites Only H-0=0 = Any Horizontal Control H-A=0 = Horizontal Order-A H-B=0 = Horizontal Order-B or Better (HARN) H-1=0 = Horizontal Order-1 or Better H-2=0 = Horizontal Order-2 or Better V-0=0 = Any Vertical Control V-1=0 = Vertical Order-1 V-2=0 = Vertical Order-2 or Better TID=0 = Vertical Tidal Bench Mark F-C=0 = FBN and/or CBN P-S=0 = PAC and/or SAC COR=0 = CORS D-D-0 = Destroyed Marks Only (Normally not published) The last field above indicates the Monument Stability, Example: H-2-0 = Horizontal Second Order Any Stability H-2-B = Horizontal Second Order Stability B The Output Format is: Dist = Distance from Center (For Radius retrieval Only) PID = NGS Permanent Identifier H = Horizontal Order V = Vertical Order Vert_Source = Vertical Datum and How Determined Approx. = Approximate Latitude Approx. = Approximate Longitude Deignation = Station Name Use the URLs shown below with a 'F-' preceeding parameter 1 if your want your output to be contained in a scrolling list box on a Form. F-RADIUS: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-RADIUS&2=N384417&3=W0982215&4=5.0&5=X-0-0 F-MINMAX: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-MINMAX&2=N413000&3=W0982215&4=N413730&5=W0983730&6=X-0-0 F-NAME: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-NAME&2=NE&3=PUMKIN&4=X-0-0 F-PROJECT: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-PROJECT&2=GPS1229/8&3=N&4=X-0-0 F-COUNTY: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-COUNTY&2=FL&3=125&4=X-0-0 F-PIDS: http://www.ngs.noaa.gov/cgi-bin/get_mark_list.prl?1=F-PIDS&2=MN0298+AC3260+JG0700&3=X-0-0